This “ART OF SEEING” series done by Ken Lee, has made me think of all the things we should all learn in photography, to make us a better photographer. Without light, there would be no picture. Hate to say it, but, this is an important subject.

Let’s take a look at the different types of light so we can all understand how to use them:



Diffused light that which is not harsh and direct, it has been softened in some way. A great example is when you are outside and the sun is shining, with no clouds in the sky. The light is harsh and you will notice that there will be a lot shadows falling on or around your subject. But, if clouds are in the sky, and they block out some of that harsh sunlight, the light then becomes diffused.

Note on this beautiful photo: Here you see no shadows, the light has been diffused, probably by a cloud. This is a good type of light because everything seems to have the same equal amount of light. Photo by Dan Gold on Unsplash

You can use diffused lighting to your advantage in a great way. If you are shooting portraits on an overcast (diffused) day, you are pretty much shooting with nature’s own softbox. You will be able to work with your subject easier, and have different angles to shoot from, because you won’t be limited by the harsh lines and shadows that undiffused light can create. Overcast (diffused) lighting is preferred by many photographers, as it is a flat and even light. If it were a particularly sunny and bright day, shooting in the shade would also offer you some diffused lighting.

This particular image shows the use of diffused lighting, using the shade of the building to soften the light, while also reflecting light shades back to the subject.


Backlighting is where you are illuminating your subject from the back, as opposed to from the front, or the side. Working with backlight you can silhouette your subject, or give them a glow. To Silhouette your subject, you would meter for the sky and to create a glow around your subject, you would meter for the subject itself. You need to place your subject in front of your preferred light source and allow that light to illuminate your subject. If you are using the sun as your light source, different times of the day will give you different types of backlighting. The lower the sun falls, the softer the light will feel. You may find that sometimes you will have to move yourself into a position where your camera can autofocus or switch to full manual, as the light can be so strong that your focusing point struggles to find what it is you want to focus on.


Reflected light can be found everywhere, on most surfaces. Reflected light is literally the light that is reflected from a particular surface or material. If you were to shoot a portrait next to a white building, the light hitting the building would be reflected on to your subject, creating a soft light. If you were in the middle of the red Moroccan Atlas Mountains and you were to shoot a portrait, there would be a softer red reflection coming onto your subject from the ground. Or, if you were doing a portrait session outside and you wanted to bounce some additional light into your subject’s face, you could use an actual reflector. They normally come in two colors; one side gold, and one side white.

Reflected light tends to be quite soft and takes on the color of the surface/material that it is being bounced off.

The reflector was being used with the gold side to reflect a warm glow onto the subject’s face.

I had some help writing this article. Thanks to: Natasha Cadman / from Digital photography school for her great knowledge on this subject.

Tomorrow’s blog: Different colors of light, and how to work with them.

Join our email newsletter list! Great new insights, and special promotions and offers come with the newsletter. And subscribers get first knowledge of things to come.

2 thoughts on “LEARN ABOUT LIGHT

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.